User's Manual

The device has four operation modes (Gateway/Bridge/WISP/AP Client).
Bridge/WISP/AP Client:
The default IP addresses for the device are 10.10.10.254, so you need to
make sure the IP address of your PC is in the same subnet as the device,
such as 10.10.10.X.
It will take about 25 seconds to complete the boot up sequence after
power on from PoE.
Gateway:
The default IP addresses for the device are 172.32.1.254, so you need to
make sure the IP address of your PC is in the same subnet as the device,
such as 172.32.1.X.
It will take about 25 seconds to complete the boot up sequence after
power on from PoE.