User's Manual
ARGtekCommunicationInc. www.argtek.com
E‐Mail:
sales@argtek.comTel:+886‐2‐2999‐6958 Fax:+886‐2‐2999‐7742
Part I: External Installation Direction
Package Content
AP Router 1
DC 12V Power Adapter 1
Dual Band Antenna 1
PoE DC Injector 1
Paper QIG 1
Manual/QIG CD 1
AP Router Connection
Before installing the router, connect your PC to the internet through your
broadband service.(If there is any problem, contact your ISP.)Then proceed
through the following steps.
1. Turn off your PC(s), cable/(A)DSL modem and the router.
2. Adjust the antenna. Normally, upright is a good place to start.
3. Connect the PC(s) and each switch/hub on your local area network to the
LAN ports on the router.
4. Connect the ADSL/DSL/cable modem to the router WAN port.
5. Connect the power adapter between the power socket on the router and
an electrical outlet. The router will start to work automatically.
6. Turn on your PC(s) and the cable/(A)DSL modem.