User's Manual

Wireless 802.11a CPE
User Manual
Page 20 of 36
DHCP Type: Select Disable to disable this Router to distribute IP address. Select Server to enable
this Router to distribute IP addresses (DHCP server). And the following field will be activated for
you to enter this starting IP address.
Start IP address: Specify the starting IP address of the IP address pool. Default Start IP:
192.168.1.100.
End IP address: Specify the ending IP address of the IP address pool. Default End IP:
192.168.1.250.
Lease Time: Specify the time duration for which the settings will be in effect. Default: 86400
seconds.
802.1d Spanning Tree: Default: Disable.
LLTD: Default: Disable.
IGMP Proxy: Default: Disable.
UPnP: UPuP is architecture for pervasive peer-to-peer network connectivity of PCs and intelligent
devices or appliances, particularly within the home. UPnP builds on Internet standards and
technologies, such as TCP/IP, HTTP, and XML, to enable these devices automatically connect
with one another and work together to make networking – particularly home networking – possible
for more people. Default: Disable. Router Advertisement: Default: Disable.
PPPoE Relay: Default: Disable.
DNS Proxy: Enable the DNS Proxy that will relay users’/clients’ DNS requests to a real DNS
server IP address. Users no need to specify real DNS server IP address. Default: Enabled.
2.3.3. DHCP Clients
DHCP client computers connected to the device will have their information displayed in the DHCP Client
List table. The table will show the MAC Address, IP Address and Expired in of the DHCP lease for each
client computer.
MAC Address: Shows the client MAC address information.
IP address: Shows the client IP address information.
Expires in: Shows the expired time of the client.