User's Manual

Firmware Upgrade

Upgrading Firmware The Web-Browser upgrading interface is the simplest

and safest way for user, it will check the firmware checksum and signature,

and the wrong firmware won’t be accepted. After upgrading, the device will

reboot and please note that depends on the version of firmware, the

upgrading may cause the device configuration to be restored to the factory

default setting, and the original configuration data will be lost! To upgrade

firmware, just assign the file name with full path then click ” Upload” button as

the following page.

Memory Limitation To make sure the device have enough memory to upload

firmware, the system will check the capacity of free memory, if the device

lack of memory to upload firmware, please temporarily turn-off some

functions then reboot the device to get enough memory for firmware

uploading.

Configuration Data Backup & Restore

Rest Setting to Factory Default Value Since the device is designed for outdoor

used, there is no interface outside the housing to reset the configuration value to

the factory default value. The device provides the Web-Browser interface to rest

the configuration data. After resetting it, the current configuration data will be lost

and restored to factory default value.