Manualshelf

User's Manual

ManualsBrandsARGtek Communication ManualsElectronics802.11 b/g CPE (Access Point)
31323334353637383940
Configuring WAN Interface
The device supports four kinds of IP configuration for WAN interface, including
Static IP, DHCP Client, PPPoE and PPTP. You can select one of the WAN
Access Types depend on your ISP required. The default WAN Access Type is
“Static IP”.
Static IP
You can get the IP configuration data of Static-IP from your ISP. And you will
need to fill the fields of IP address, subnet mask, gateway address, and one of
the DNS addresses.
31