User's Manual

WDS Application

Wireless Repeater

Wireless Repeater can be used to increase the coverage area of another device

(Parent AP). Between the Parent AP and the Wireless Repeater, wireless

stations can move among the coverage areas of both devices. When you decide

to use the WDS as a Repeater, please refer the following instructions for

configuration.

※

In AP mode, enable the WDS function.

※

You must set these connected devices with the same radio channel and

SSID.

※ Choose “WDS+AP” mode.

※

Using the bus or star network topology.

Wireless Bridge

Wireless Bridge can establish a wireless connection between two or more Wired

LANs. When you

decide to use the WDS as a Wireless Bridge, please refer the following

instructions for configuration.