User's Manual

Int. Roaming

This function will let Wireless Stations roam among a network environment with

multiple devices. Wireless Stations are able to switch from one device to another

as they move between the coverage areas. Users can have more wireless

working range.

An example as the following figure.

You should comply with the following instructions to roam among the wireless

coverage areas.

Note ： For implementing the roaming function, the setting MUST comply the following

two items.

All the devices must be in the same subnet network and the SSID must be the

same.

If you use the 802.1x authentication, you need to have the user profile in these

devices for the roaming station.

Block WLAN Relay (Isolate Client)

The device supports isolation function. If you are building a public Wireless

Network, enable this function can provide better security. The device will block

packets between wireless clients (relay). All the wireless clients connected to the

device can’t see each other.