User`s manual

User’s Manual 52
Installation
Follow the installation procedure below to install Microsoft ActiveSync, connect your PA-60
to your desktop computer, and establish a partnership for synchronization (if desired):
1. Download the executable program “mswrd832.cnv” from CD. Execute this program.
2. Select the folder into which Microsoft ActiveSync will be installed. If you choose not to
download into the displayed default folder, click the Change button.
3. After you’ve selected the folder, click Next to set up Microsoft ActiveSync. After you’ve
installed Microsoft ActiveSync and restart your computer.
7.3 Connecting the PA-60 to ActiveSync
Connect the PA-60 to a desktop PC using a USB cable. Make the partnership between the
desktop PC and PA-60 through ActiveSync, and then proceed with the synchronization of the
desktop PC and PA-60. Use a USB cable to link the PA-60 to the desktop PC.
The table below shows available communication devices (USB, serial) according to operating
system.
Supporting operating system
Connection
methods
Desktop PC OS
Windows 95
Windows 98
Windows
2000/XP
Windows NT
USB
Not available
Available
Available
Not available
Serial
Not available
Available
Available
Available
Connect a desktop PC and the PA-60 with a cable as follows:
4. Connect a USB cable to the USB port of the desktop PC.
5. Insert the cable into PA-60 mobile computer. The PA-60’s PC connection program runs
automatically and Microsoft ActiveSync in the desktop links them together.
6. To set up a connection, the “New Connection” set-up wizard appears on the desktop
computer. Set-up methods are discussed in the following section.