Argox FM-201 Integration Manual 0
Contents 1. 2. 3. 4. 5. About FM-201 Scan Engine ..................................................................................... 2 Signal Connector ...................................................................................................... 4 2.1. J2 Connector ................................................................................................. 5 2.2. Interface Connector ......................................................................................
1. About FM-201 Scan Engine The FM-201 Scan Engine is a small decoder that can read all popular 1D barcodes. This device is comprised of two main parts: an optical system and a control board. The optical system is a 2048 pixel linear imager. The control board contains firmware to scan, decode and output barcode data. The below block diagram shows the data flow from control board to the host. Optical System (LED, Condenser, Lens, chassis..
The FM-201 Scan Engine is specifically designed for easy integration into your application devices. The control module supports RS232, Keyboard wedge and USB 1.1 interface. The control board is based on MCU to fulfill the functions of barcode scanner, image decoding, parameter settings, and communication with host.
2. Signal Connector The control module is reserved connection pins for interface, trigger, buzzer, LEDs and power. J2 is comprised of 14 pins that start from right to left, pin1 to pin 14.
J2 Connector Pin Description Example 1 GND.— Supply signal ground 2 RTS ( To Host ) / CLK/KB.— TTL level 232 Request to send 3 RxD ( From Host ).— TTL level 232 receive data 4 CTS ( From Host ) / DATA/KB.— TTL level 232 Clear to Send signal. 5 DATA/PC ( PS2 DATA ). 6 CLK/PC ( PS2 CLK ). 7 TxD ( To Host ).—TTL level 232 transmit data. 8 5 V DC input—Supply voltage input. 9 I/F identification . According to the voltage level at I/F, the scanner will Wire I/F with a 4.
+5V R8 33R R0603 + Buzzer To provide the indication of sound. The generation of frequency & duty ( loudness) of buzzer sound is done by Timer Z in CPU C21 10uF C22 0.1uF Buzzer C0603 D2 1N4148 SOD80C 3 C0805 - 11 1 2 R7 1K Q2 2N2222 SOT-23 R0603 BUZZER 12 GRE_LED. Dual LED (LED3) Dual Red&Green LED for indication. 13 RED_LED. +5V Dual LED (LED3) Dual Red&Green LED for indication. R33 220R R0603 R9 220R R0603 Red/Greed LED LED4 5690F_0 Dual LED RED_LED GRE_LED 14 N.C.
2.2. Interface Connector The control board to host interface signals have different definitions depending on the operation of RS232, keyboard wedge or USB.
3. Mechanical Specifications 3.1. Distance from window The window should be mounted close to the front of the Scan Engine. The maximum distance is measured from the Scan Engine housing to the farther surface of the window. The unwanted reflections can occur at either surface and the window thickness can vary, the further side is the worse case. 3.2. Window size and material 1. Window material must be clear and anti-scratch. Clarx, Polycarbonate and CR39 are preferred. 2.
Window Distance and Angle Diagram Window Size and Distance Diagram 9
Window Size Diagram ( LED Aimer) 10
FM-201 Engine Bracket Mounting The illustration below show the mechanical mounting dimensions for the FM-201 11
4. General Specification Item Specification Scanning system Red LED light source. 2048 pixels CCD. Resolution 4 mil (0.10mm). Scan angle Pitch: <60° Yaw: <70° Depth of field Ambient lux: 300 +/-30 lux (EAN13, 13mil, 35 mm wide , PCS=90%) (fluorescent lamp). PCS = 90%. Resolution Near field Far field 4 mil (Code 39, 1:2.5) , 45mm 70mm 5 mil (Code 39, 1:2.5) 45mm 80mm 10 mil (Code 39, 1:2.5)43mm 45 mm 125mm 13 mil (Code 39, 1:2.5)83mm 90mm 155mm 20 mil (Code 39, 1:2.
Reading indication LED and adjustable beep sound (Add LED&Buzzer yourself) Symbologies Code-11, Code-39, Code-93, Code-128, Codabar, EAN-8/13 (with add-on), UPC-A/E UPCE (with add-on). MSI/Plessey ,UK/Plessey, Telepen Industrial 2 of 5, Interleaved 2 of 5, Standard 2 of 5, , Matrix 2 of 5 Eur.China postage. Italian Pharmacy code (code-32). RSS-14, RSS-limited, RSS-expanded. Power supply Operating range: 5 VDC +/-0.25 (Scanner only) Power consumption: Scanning: Max.: 250 mA (Test Mode). Typical: Max.
The illustration below show s a unit similar to the unit tested.