Instruction manual

15
Programming AS-9500 Series Scanner
To program the AS- 9500, you must scan a series of programming
barcodes in the correct order. Fold out the back cover of this
manual. You will see a table of alphanumeric barcodes, which are
used to program the various options presented.
To program each option, you must:
1. Scan the Program barcodes.
2. Enter the option mode by scanning the option barcodes
3. The necessary alphanumeric inputs are listed. Scan these
alphanumeric entries from the Program Chart
. To confirm
above steps, you must scan the Save barcode.
.