How-To Guide

- 11
-
Instructions for the base:
一.Data transmission
1. Connect the USB data cable, and the blue light on the base flashes;
2. When the Bluetooth is paired with the Bluetooth on the base, the blue light
on the base is steady on;
3, the transmission mode of the base is divided into serial port, USB HID and
USB virtual serial port three ways;
4. The transmission mode of the base can be set by bar code or command.
二.charging
1. When the battery is out of power, the red light is on when the scanning gun
is put into the base, and the green light is on when it is fully charged;
2. When the battery is fully charged, the green light on the scanning gun is on
when the scanning gun is placed in the base;