User manual

Parts and Functions
4
Parts and Functions
○
1
Remote LED: (Orange) Blinking: Received a remote control signal.
Triplet blinking: HDD error/ First time firmware installation/ Forbidden
operation
On: Recording in progress.
○
2
Power LED:
(Blue)
Off: Standing by.
On: Activated.
On with 2 blinks every 5 seconds: Scheduled recording standing by.
Fast blinking: Booting up/ Accessing data through PC connection.
○
3
Power switch: Press and hold this button for about 3 seconds to turn off this device.
○
4
USB type A connector: Connect the USB mass storage devices/ USB wireless dongle with this
device using a USB cable.
○
5
USB connector: Reserved
○
6
HDMI connector: Outputs digital video/audio signals with a HDMI cable. (cable not
provided)
○
7
RJ45 connector: Connect this device to Local Area Network (LAN) using a RJ45 cable.
(cable not provided)
○
8
USB type B connector: Connecting this device with a PC using a USB cable.
○
9
Power connector: Connect to the AC adapter. (DC 12V, 2A)
○
10
Component video
output connector:
Output component video signals.
The colors of the jacks are green, blue and red. (cable not provided)
○
11
Composite audio/video
output connector:
Output composite video/audio signals.
The colors of the jacks are yellow, red and white.
○
12
Composite audio/video
input connector:
Input composite video/audio signals.
The colors of the jacks are yellow, red and white.
○
13
Coaxial digital audio
connector:
Output S/PDIF digital audio signal. Connect this jack to an AV receiver
with a RCA cable. (cable not provided)