User manual

Setup
23
Network.
Static IP (MANUAL):
Use to manually assign the IP Address, Subnet Mask, and Default
Gateway used by this device. Use number pad on the remote control
to enter the desired addresses.
Wireless Setup
Connect:
After setting up the wireless access point, use this option to automatically
connect or reconnect this device to the wireless network.
Modify:
Select to set up the wireless access point for this device. Modify will
automatically scan for available wireless networks and allow you to set the
login and password for the network you select. You can then configure settings
for connection mode, wireless SSID, and wireless security.
Note:
• Please select Open System and WPA-PSK authentication when setting up
your wireless AP.
• Shared Key, WPA2, WPA Enterprise, and RADIUS with 802.1x
authentication are not supported.
System
Time
Set time clock used by this device.
Use the number keys on the remote control to enter the year (4-digit format), month (1-2
digits as needed), and day (1-2 digits).
Enter the time in hours, minutes, and seconds on a 24 hour clock.
Restore Default
Set all settings to default values except the Password.
Cancel: Abort this operation.
OK: Restore default values.
Update software from HDD
By providing an update software image file, it will update software on this device.
Cancel: Abort this operation.
OK: Perform this update operation.
MISC
Slide Show Timing
Set time to display each photo during slideshow.
Transition Effect
Set fade or transition options for slideshow display.
Background Music
This function allows you to play photo slide show and music at the same time.
Off: Turn off this option.