Instruction manual

HELPLINE NO 08448012949
9
ORIGINAL INSTRUCTIONS
PLUG REPLACEMENT
Your Power Tool is supplied with a tted
plug, however if you need to t a new plug
follow the instruction below.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue = Neutral Brown = Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked
with N.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L.
If a 13 AMP (BS 1363/A) Plug is used, a
13 AMP Fuse must be tted, or if any other
type of plug is used a 13 AMP Fuse must
be tted, either in the Plug or Adaptor, or
on the Distribution Board.
Note: If a moulded plug is tted and has to
be removed take great care in disposing
of the plug and severed cable, it must
be destroyed to prevent engaging into a
socket.
If the supply cord is damaged it must be
replaced by a service agent or a similarly
qualied person in order to avoid hazard.