Instruction manual

HELPLINE NO 08448012949
6
ORIGINAL INSTRUCTIONS
NOISE INFORMATION
A weighted sound pressure L
PA
:81dB(A)
A weighted sound power L
WA
:92dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pressure is over 85dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
= 2.93m/s²
Uncertainty K = 1.5m/s²
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job. This
may signicantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
o
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
TECHNICAL DATA
Voltage
Power input
No load speed
Diameter of base
Orbital dia
Protection class
Machine weight
230-240V~50Hz
105W
13000min
-1
140x140x80mm
1.4mm
/II
0.9kg