Fitting Instructions

INSTALLATION
NOTE: If you are not entirely sure of how to connect
and fit the shower head please consult a qualified plumber.
SHOWER HEAD INSTALLATION
1. Identify all components and check for completeness, particularly before arranging installation
2. Fix the shower head and the threaded end of the connecting elbow with a wrench,
adjust the shower head, make the shower head spit the water face down.
3. Check all joints and connections for leaks.
AFTERCARE
INSTRUCTIONS
If the water line is uneven during use, use a towel to gently wipe the small silicone spout on the spray plate, remove foreign objects.
Your fitting has a high quality finish and should be treates with care to preserve the visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your mixer is to wipe with a soft damp cloth.
Stains can be removed using washing up liquid.
All bath cleaning powders and liquids will damage the surface of your fitting even the non-scratch cleaners.
FITTING INSTRUCTIONS
SQUARE SHOWER HEAD