Solid Pine 6 Shelf Unit Assembly Instructions - Please keep for future reference 906/3983 Dimensions Width - 50cm Depth - 19cm Height - 123,6cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline 03456 400 800 Issue 2 - 02/07/2018
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
If you have damaged os missing components, call the Customer Helpline: 03456 400 800.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. A C D B Wall plug 6mm x 1 16mm Screw x 1 40mm Screw x 33 D E Metal bracket x 2 Plastic bracket x 1 Tools required Phillips screwdriver (medium & large) Small hammer Ruler/tape measure Drill 6mm Suitable drill bit (for use with wall plug) For fixing to wall only.
Assembly Instructions Step 1 3 Fix shelves 2 , top rail 3 bottom rail 4 on side panel 1 using screws A Curved edge Curved edge 4 2 2 2 A 2 A 2 1 2 A A 3 A A A A A A A A Curved edge Step 2 Fix other side panel 11 on shelves 2 , top rail 33 bottom rail 4 , using screws A .
Assembly Instructions E E D - Wall plug supplied for masonry wall only. - Wall plug and fixing used must be correct for wall type. D C B A - If any doubt seek professional advice. Wall Fixing D Fix metal bracket E B to the using screw C central superior side of the furniture. Fix metal D to the wall, bracket E C and using wall plug D A . screw B E, Crossing piece F between the holes of the metal brackets, fix according the illustration.
A Guide to -Wall Mounting & Fixings Important: When drilling into walls always check that there are no hidden wires or pipes etc. Important note: If plastic wall plugs are supplied with your product: Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualifed tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
7
