Mia 6 Drawer Chest - White Assembly Instructions - Please keep for future reference 8573429 Dimensions Length - 149.4cm Depth - 40cm Height - 73cm Weight - 43kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • During assembly children should be kept away from the product due to possible risk of injury.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 4 7 Top x1 (149.4x40.0x1.6cm) No. 4301-1614941-40 Leg x4 (71.4x4.0x2.6cm) No. 12-02607141-20 List Long x1 (138.2x2.5x1.5cm) No. 12-01513822-40 2 5 8 Side panel Right x1 (65.4x36.1x1.2cm) No. 4301-1206541-40 Plinth Curved x1 (138.2x6.5x1.5cm) No. 12-01513821-40 Drawer side Right x6 (35x16.7x1.3cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3933-15010 No. 4020-007 A B Ø7x34mm Minifix bolt x33 Ø15x9.5mm Minifix cam x35 4.0x30mm Chipboard screw x16 No. 3940-00009 No. 4010-027 E D No. 3903-40030 C No. 4022-004 F Ø18/Ø6,5x9.0mm Spacer x18 1.6x16mm Nail square x48 No.
Assembly Instructions Step 1 Insert the dowels H into the holes in short plinths 6 . It may be necessary to tap the dowels in very gently with a small hammer. A A A H A A 1 Attach minifix bolts A to top panel 1 . A H A H A 6 6 H H Step 2 C UP C Attach the side panels 2 and 3 to the legs 4 using screws C . C C Make sure the top of the side panel is flush with the legs and there are no gaps between the side panel and the edge of the groove in the legs.
Assembly Instructions Step 3 N A H E H Insert the dowels to the holes in the side panels 2 and 3 . H H Left side Attach the drawer runners D to the side panels 2 and 3 with euro screws N . Start from the third hole from the front of the metal runner D and align the rest as instructed on the pictures.
Assembly Instructions Step 5 Attach second set of drawer runners D to the partition 13 with euro screws N . Start from the third hole from the front of the metal runner D and align the rest as instructed on the pictures. N D D N N D 13 N D N Be aware of the front edge! Note that the drawer screws must be inserted from different holes in the runners! Front edge D N N N 3rd hole N Front edge Step 6 Insert sleeve connector O into the hole inside partition 13 .
Assembly Instructions Step 8 Attach the top 1 to the side panels 2 and 3 and partition 13 with the minifix cams B . B 1 B B B 3 13 B B B 2 Step 9 Attach angles G to the long plinth 5 using screws M . Attach plinth 5 to side panels 2 and 3 using screws M .
Assembly Instructions Step 10 i 7 Fasten the list to the top panel using screws i , placing the screws into the marking holes in top 1 . K P i 7 i 1 5 Attach long plinth to the partition 13 with angle P using screws K . Follow the marking holes. i 5 i 13 i Don’t overtighten. i K 13 K P 5 Step 11 F Attach the back panel 14 with nails F to the back side of the chest. Nail the back panel 14 to the carcass, ensuring that there are NO GAPS between the top 1 and the back panel 16 .
Assembly Instructions Step 12a Measure out the positions for the wall attachment straps. Drill two holes spaced as illustrated with the appropriate size for the wall attachment fitting (see next step). L L 1 ,5 60 cm 69 cm Pull the two straps through the gaps in top plate 1 .Push the furniture against the wall and secure the strap under the top plate with washer and screw. L L Step 12b Different types of wall fittings. Contact your local DIY or hardware store for the wall plugs and screws.
Assembly Instructions Step 13 Insert the dowels H into the holes in the drawer sides 8 and 9 . A H 8 A Attach the minifix bolts A to the drawer front 10 . A 9 Repeat for all drawer sides and drawer fronts. H A 10 A Step 14a Attach the drawer sides 8 and 9 to the drawer front 10 with the minifix cams B . B B 10 9 B Repeat for all drawers. B 8 Step 14b i i Push the drawer base 12 carefully into the drawer. i 9 Attach the drawer back 11 to the drawer sides 8 and 9 with the screws i .
Assembly Instructions Step 15 Place the assembled drawer between the drawer runners D . Attach the drawer sides 8 and 9 to the runners using the screws J . J Repeat for all drawers. J 8 J 9 J 9 Assembly is complete. If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@flexa.dk 11 Ref.no.
