Mia Daybed & Drw. White Assembly Instructions - Please keep for future reference 8042572 Dimensions Length - 193,2cm Depth - 95,4cm Height - 68cm Weight - 47,3kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly 80-27904-20 Singlebed IMPORTANT! KEEP FOR FUTURE REFERENCE PLEASE DISPOSE OF PACKAGING MATERIAL. PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN WARNING! Not suitable for children under 4 years. WARNING! Do not place this child’s bed near heat sources, windows and other furniture. WARNING! Do not use this child’s bed if any of the parts are broken, torn or missing.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 4 End panel Right x1 (95,4x68,0x1,6cm) No. 4301-1609541-40 Trundle bed front x1 (189,0x22,0x1,6cm) No. 4301-1618901-40 7 Trundle back x1 (189,0x8,9x2,0cm) No. 1331-18901 10 List x1 (174,0x2,6x2,0cm) No. 12-02017402 3 2 5 End panel Left x1 (95,4x68,0x1,6cm) No. 4301-1609542-40 Slat x28 (89,7x6,5x1,5cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3922-06014 No. 3913-06070 A M6x70mm Connecting bolt x10 B C M6 ø10x14mm Barrel nut x10 4,0x30mm Chipboard screw x56 No. 3901-45040 4,5x40mm Chipboard screw x4 F 3,5x16mm Chipboard screw x8 H 6,3x60mm Assembly screw x8 7,0x40mm Confirmat screw x37 No. 3930-10040 No.
Assembly Instructions D Step 1 F Insert the dowels H into the holes in bedsides 6 and back rail 8 . H H It may be necessary to tap the dowels in very gently with a small hammer. H D 9 Attach the lists 9 to the bedsides 6 using screws F and D . F D 6 8 H H Step 2 A Attach the bedside 6 and back rail 8 to the endpanels 1 and 2 by placing the dowels into the holes in the end panels. Insert barrel nuts B into the holes in bedside 6 and back rail 8 . Attach endpanels 1 and 2 using bolts A .
Assembly Instructions Step 4 C 5 Place two slats in the ends of the bed, against the end panels. Fasten with four chipboard screws C . Place one slat 5 in the middle of the bed. Follow the measurements. 852 mm 852 mm C C 5 C 5 5 Push the bedsides 6 together whilst attaching middle slat 5 to the bed with two chipboard screws C . C Step 5 66 mm C Position the remaining twelve slats 5 in the bed with an approximate distance of 66 mm between each.
Assembly Instructions Step 6 Attach the list 10 to the trundle front 4 using screws F . F F 4 10 G Step 7 G i Attach the trundle front 4 and back 7 to the distance pieces 3 using screws G . Place felt pads i to the ends of the trundle back 7 . i 3 7 G G i 4 3 Step 8 Attach castors J to the distance pieces 3 using screws E .
Assembly Instructions Step 9 Position slats 5 in the bed with an approximate distance of 64 mm between each and 130mm from the edge of the distance piece 3 . C 64-65 mm C Fasten each slat with two screws C 5 5 5 5 5 5 5 5 5 5 5 5 5 Assembly is complete. 130 mm C If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 E-mail: order@flexa.dk Ref.no.
