Assembly Instructions

ManualsBrandsArgos Home ManualsDining room furnitureBolitzo Oak Effect Dining Table & 2 Benches

Bolizto Table and Bench

Assembly Instructions - Please keep for future reference 805/6001

Issue 1 - 08/04/20

Dimensions Dimensions

Table: Bench:

Length - 110cm

Width - 70cm

Height - 76cm

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline:

Argos = 0345 640 0800

Length - 80cm

Width - 29cm

Height - 47cm

Summary of content (6 pages)

PAGE 1
Bolizto Table and Bench Assembly Instructions - Please keep for future reference Dimensions Dimensions Table: Bench: Length - 110cm Length - 80cm Width - 70cm Width - 29cm Height - 76cm Height - 47cm 805/6001 Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800 Issue 1 - 08/04/20
PAGE 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible.
PAGE 3
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0345 640 0800 Please check you have all the parts listed below 11 1 Table top x 1 2 Table leg x 2 3 Table rail x 2 4 Seat x 2 5 Bench leg x 4 6 Bench rail x 4 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
PAGE 4
Assembly Instructions Step 1 3 Assembling the table rails 1 1 Carefully place the table top 1 face down on a flat protected surface. Attach the table rails 3 by inserting the dowels on the rails into the brackets on the table top 1 as shown. 3 1 3 Step 2 Assembling the table legs Position the table legs 2 on the table top as shown and fix by inserting the fastener on the table rails 3 into holes on the table legs then push it down to lock.
PAGE 5
Assembly Instructions Step 3 3 Securing the table legs A Attach caps A into holes on the table rails 3 as shown. Insert and lock it carefully into holes by pressing firmly. A A 3 A 3 A Then carefully turn the table upright and place on a flat surface. At least 2 persons are required to lift the table. Step 4 Assembling the bench rails Carefully place the seat 4 face down on a flat protected surface.
PAGE 6
Assembly Instructions Step 5 5 Assembling the bench legs Position the bench legs 5 on the seat as shown and fix by inserting the fastener on the bench rails 6 into holes on the bench legs then push it down to lock. 5 6 6 5 5 5 5 6 6 6 6 Step 6 6 Securing the bench legs A Attach caps into holes on the bench rails as shown. Insert and lock it carefully A into holes by pressing 3 firmly. A A 6 A 6 A A A Then carefully turn the bench upright and place on a flat surface.