Assembly Instructions

5
Assembly Instructions
Step 4
Step 5
B
A
A
2
2
B
A
Hook
A
B
a:
a:
b:
b:
Fitting the legs
a: Secure the gazebo
to the ground at each
corner, Insert two pegs
through the hole in each
Frame leg into the ground
(insert at an angle).
Take care not to bend the
pegs, use a rubber mallet
to help Insert if required.
b: Attach the hooks on the
end of the canopy legs to
the holes at the end of the
frame leg,the canopy
cover can be tightened
by moving the hooks to
a lower Hole.
Attaching the guy ropes
Note: At least 2 people
are required for this
procedure.
a: Attach the end of each
guy Rope to a”D” ring
at each corner of the
canopy cover.
b: Use the pegs to
secure the other end of
the guy rope to the ground
(insert at an angle).
Remove any slack from
the Guy rope by holding
the lower end of the rope
and sliding the tensioner
up towards the tent.
Do not over
tighten the Guy
ropes as this can damage
the fabric seams.
Caution:
The assembly is now
complete