Assembly Instructions

Spring clip
Leg
4
Assembly Instructions
Step 3
Locking and extending
the Gazebo frame
Note: At least 2 people
are required for this
procedure.
a: In one corner at a time,
lock the Gazebo frame
in position by sliding the
corner bracket up until
the spring clip engages
into the bracket.
Pull and extend each leg
until the spring clips
engage into the hole
in the outer tubes.
b: Use the velcro tapes
top frame as shown
c: From inside, check
that of the frame
sides are as shown.
Note: each velcro tap
frame are as shown.
Warning: the velcro tap
must stretch tight as this
could cause rain water to
collect on the canopy and
a hazard.
stretch the tap first
stick velcro tap second
Do not compress more
than shown or the frame
can be damaged.
2
2
a:
b:
c:
Finished position of frame sides - Do not compress any more.
1
2
A
1 2
Corner
Spring clip
bracket
Note: There are two
spring clip location holes
in each leg, using the
lower holes will increase
the canopy tension,
pulling it tighter.