Assembly Instructions

4
Step 1
80%
x3
Assembly Instructions
If you have damaged or missing components, call the
Customer Helpline: 0870 112 1928 or email:
[e-mail] (quoting your original order number
and the reference numbers below)
5
x 8
B
B
B
C
Step 2
B
B
Prepare the drawer
fronts
Screw 2 metal dowels
into the holes shown on
the back of each drawer
front .
Note: Tighten the metal
dowels up fully against
the panels.
B
5
Prepare the drawer
sides
Insert a small locking
nut into the hole
shown on the left drawer
side and right drawer
side .
Note: The arrow on the
locking nut must point
towards the hole in the
edge of the panel.
Step 3
C
8
9
Attach the drawer
sides to the drawer
front
Push the left drawer side
. and right drawer side
. onto the back of the
drawer front .
Turn the small locking
nuts on the left
drawer side and right
drawer side .
Note: Turn the locking
nuts clockwise to
secure panels - more
than 1/2 a turn.
9
8
9
5
C
8
9
Groove
8
C
Note: The locking nuts can be on either surface of the drawer sides.
Make sure that the groove is on the inside, as shown.
5
x 8
8
C
Note: Due to the manufacturing process, the holes for the
locking nut can be on either surface of the drawer sides.
x 8 x 8
C
C
8
9
8
9