Assembly Instructions

Step 18

Fit the top

Push the top onto

the 2 sides

and .

Use a screw-

driver to

tighten the 2

large locking

nuts fitted

to the sides

and .

Line up the hole in the

bottom of the upright

with the bracket and

secure it using screw .

Fit the back

a: Square up the unit by

making sure that

measurement x to x

equals y to y.

b: Place the back

onto the unit.

Nail around

the outside

edges of the

back .

Note: Nails

should be

spaced about

150mm apart.

Using 2 people,

carefully stand the

unit up for the next

step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Warning: The

unit is heavy.

Lift with care.

Step 19

2 people are needed here