User Manual

10
To secure the unit.
Drill 2 x holes into the
wall that you wish the
unit to stand against.
The holes must line up
with the holes in metal
tubes . 2 x Wall
screw will locate
into these holes.
Once the holes have
been drilled push 2 x
wall plug into the
holes you have
created.
Locate wall screws
through holes in 2 x
metal tubes ,
through 2 x holes in
the wardrobe cover
and into the wall plugs
in the wall as shown.
Tighten with a Phillips
head screwdriver
Assembly complete
5
10
9
5
4