Assembly Instructions

ManualsBrandsArgos Home ManualsClothes rails and canvas wardrobesClothes Rail with Lower Swing Out Rail - Black

Clothes Rail With Lower Swing Out Rail

359/1815

Assembly Instructions - Please keep for future reference

Dimensions

Width - 84cm

Depth - 44cm

Height - 113-187.5cm

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800

Issue 1 - 12/11/2014

Summary of content (6 pages)

PAGE 1
Clothes Rail With Lower Swing Out Rail Assembly Instructions - Please keep for future reference 359/1815 Dimensions Width - 84cm Depth - 44cm Height - 113-187.
PAGE 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on the following pages. • During assembly do not stand or put weight on the product, this could cause damage. • Remove all ﬁttings from the plastic bags and separate them into their groups. • Assemble the item as close to its ﬁnal position (in the same room) as possible.
PAGE 3
Components - Parts If you have damaged or missing components, call the Customer Helpline: 03456 400800 Please check you have all the fittings listed below 1 Black Coated Tube x 1(872 mm) 2 Black Coated Tube x 1 (900 mm) 3 Black Coated Tube x 1 (968 mm) 4 Chrome Plated Tube x 2 (840 mm) 5 Chrome Plated Tube x 1 (500 mm) 6 Chrome Plated Tube x 2 (950 mm) 7 Black Coated Tube x 2 (790 mm) 8 Black Coated Tube x 1 9 Plastic Clipper x 3 11 Plastic Connector x 1 10 Pole Locker x 3 12 Plastic
PAGE 4
Assembly Instructions Step 1 Connect the Black Coated Tube 7 with Plastic Base 12 . 12 7 Import Note: Ensure that tubes are tightly connected with Plastic Base 12 . See fig 1 fig 1 Step 2 Connect Black Coated Tube 1 and 2 along with another Black Coated Tube 8 and then insert them with Plastic Bases 12 . Insert Black Coated Tube 3 to Plastic Base 12 . 9 9 1 Insert Plastic Clipper 9 through each Black Coated Tube 1 , 2 and 3 .
PAGE 5
Assembly Instructions Step 3 4 10 Connect Pole Locker 10 along with Chrome Plated Tube 6 and 4 . Insert Plastic Connector 11 to Chrome Plated Tube 6 . 10 6 4 Connect Chrome Plated Tube 6 with Black Coated Tubes 2 and 3 . 11 6 Insert Chrome Plated Steel Tube 4 into Black Coated Tube 1 . 2 1 3 See fig 3 fig 3 Step 4 Connect Chrome Plated Tube 5 to Plastic Connector 11 and insert Pole Locker 10 at the end. 5 Insert Castor 13 into the Plastic Base 12 .
PAGE 6
Assembly Instructions Step 5 After you have followed each step mentioned above, you can adjust the height to desired position by loosen Plastic Clipper 9 on each Black Coated Tube 1 , 2 and 3 and screw them tightly. 9 Finally, the assembly is complete. 9 See fig 5 9 2 1 3 fig 5 Important Note: The Maximun Safe Load for long rail is 15 kg and 5 kg for short rail. Evenly distributed.