Assembly Instructions

ManualsBrandsArgos Home ManualsHome and furnitureJesse Toddler Bed Frame - White

Toddler Bed

707/3676

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800

Important – Please read these instructions fully before starting assembly

Dimensions

Width -75 cm

Depth - 145cm

Height - 57cm

Issue 4 - 04/04/17

723/9939

Summary of content (7 pages)

PAGE 1
Toddler Bed Assembly Instructions - Please keep for future reference 707/3676 723/9939 Dimensions Width -75 cm Depth - 145cm Height - 57cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800 Issue 4 - 04/04/17
PAGE 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly . Assemble on a soft level . Check you have all the components and tools listed on surface to avoid damaging the unit or your floor. pages 2 and 3. . This product has been produced . Remove all fittings from the plastic bags and separate them from natural timber; you may notice some variation in the grain into their groups. and colour of different component .
PAGE 3
Components - Panels Please check you have all the panels listed below 01 Headboard (75 x 57cm) 05 Guard rails x 2 (41 x 19,7cm) 02 Footboard (75 x 51cm) 06 Slats x 12 (69 x 6.
PAGE 4
If you have damaged or missing components, call the Customer Helpline: 03456 400 800 Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
PAGE 5
Assembly Instructions Step 1 Fitting dowels D Insert dowels D into the indicated parts. D D 03 D 04 D D D D Step 2 Assembling side rails: Insert half moon nut B into side rails 03 and 04 as shown. Then fix them to the headboard 01 using bolts A and allen key C . Caution: Make sure rails are positioned as shown with holes near to headboard.
PAGE 6
Assembly Instructions Step 3 Assembling side rails: Insert half moon nut B into side rails 03 and 04 as shown. Then fix them to the footboard 02 using bolts A and allen key C . 02 A B C A B C A C Step 4 Fixing slats: Fix slats 06 adjacent to the headboard working towards the middle of the bed using the spacer G as shown to ensure correct spacing. Fix using screws E .Periodically check that all screws are tight.
PAGE 7
Assembly Instructions Step 5 Attaching guard rails: Fix guard rails 05 using bolts F H and allen key C .