Book Tidy 719/0023 700/6007 Care & Instruction Manual Please read and retain these instructions for future reference
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Do not use this item if any components are missing or damaged. • Check you have all the components and tools listed on the following pages. • Remove all fittings from the plastic bags and separate them into their groups. • Keep children and animals away from the work area, small parts could choke if swallowed. • Make sure you have enough space to layout the parts before starting.
Components - Panels If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the panels listed below 1 Side panel x 2 2 Support x 5 (60 x 6cm) (23.5 x 74cm) 3 Non-woven sling (146 x 59.
Components - Fittings Note: The quantities below are the correct amount to complete the assembly. in some cases mor may be supplied than are required.
Assembly Instructions Step 1 Finished front edge Attaching supports Note: It would be useful to ask someone to help you at this stage. B A B A B A A Supports 2 onto the Side panel 1 . B A 2 A Use Screw covers B to cover the screw heads. B 1 2 2 2 2 Step 2 Fitting the nonwoven 3 the Supports 2 .
Assembly Instructions Step 3 Attaching side panel sA Side panel 1 onto the unit. B B Use Screw covers B to cover the screw heads.
Assembly Instructions Step 4 Fixing to wall It is recommended that the book tidy C wall E D Note: Wall plugs supplied are for solid wall only. be used for your wall, seek professional advice if in doubt D C strap D onto the support. D With help, move book tidy into position. D E Top support Warning: The book tidy is heavy. Lift with care. remove book tidy . Drill a hole and insert Wall plug E . Warning: Before drilling, check wall for hidden pipes and cables. Reposition book tidy Screw D .
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always Important note: If plastic wall plugs are supplied with your product: check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualified tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.
