User Manual

Bay window fitting
07
[06]
Locate the last curtain
hook in the hole in the
end stop.
Safety
Care Instructions
Wipe clean with a soft
dry duster.
Never use any water,solvents,
scourers,abrasives,bleach,
acids,strong detergents,
aggressive chemical cleaners
or solvent-type cleaning
solutions on the product.
Note:
Wall plugs & screws provided are
suitable for solid walls only. For any
other type of wall or celling ensure
correct wall plugs & screws are used.
If in doubt, seek professional advice.
This track will fit around bay windows. Simply follow the same procedure as steps 01 to 08 but pay special attention to the following instructions.
Note: Do not over-bend or pre-bend the track.
1)
Take care when bending your curtain track. If bent too far the curtain track glider channel may disort and prevent the gliders running smoothly.
With the front of the track facing you, bend with a gentle, sweeping curve between the brackets.The help of another person will make installation easier.
Bending the rail is easier if the rail has reached room temperature.
2)
Offer straight rail up to brackets and working from the centre of the bay, attach each bracket and p
Argos Limited
Avebury,Milton Keynes, MK92NW. www.argos.co.uk
rogreessively bend the track around the corner.
08
Sold separately
Average right angle bay,
approximate bracket position
Average 3 sided angle bay,
approximate bracket position
Average 5 sided angle bay,
approximate bracket position
[06]