Assembly Instructions

CR
CR
CR
CR
CR
CR
Assembly Instructions
10
Step 16
Fit the back
a: Square up the unit by
making sure that
measurement x to x
equals y to y.
b: Place the back
onto the unit.
Nail around the
outside edges of the
back .
Note: Nails should be
spaced about 150mm
apart.
10
F
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
10
Warning: The
unit is heavy.
Lift with care.
y
y
x
x
b:
F
10
Step 17
Fit the 4 plastic nails
Tap 2 plastic nails
into the bottom edge of
each of the sides and
. .
Stand the unit up for
the next step.
M
1
2
M
M
M
M
1
2
www.youtube.com/watch?v=FeaI6541z7o
Squaring up a Chest and tting the Back Panel