Assembly Instructions

Assembly Instructions
14
Step 23
Small piece of
waste wood
Small piece of
waste wood
ONLY drill
these 2 holes
ONLY drill
these 2 holes
DO NOT drill
these holes
DO NOT drill
these holes
13
13
Drill the handle holes
in the door
Important: Please follow
these instructions
carefully.
Lay the doors down
onto a smooth surface.
Important: Check that
the holes and hinges are
in the same place as the
diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the
door , drill through the
holes indicated opposite,
using a 2.5mm diameter
drill.
Turn the door over
and open out the 2.5mm
holes that you have just
drilled by drilling back
through them with a
5mm drill.
This will be
the left door
This will be
the right door
13
13
13
IMPORTANT
You will need to drill the doors to
suit the handles supplied