Assembly Instructions

ManualsBrandsArgos Home ManualsGarden and DIY3m x 4m Weather Resistant Gazebo with Side Panels

Dimensions

Width - 300cm

Height - 265cm

Assembly Instructions - Please keep for future reference 601/4650

4x3M Waterproof Gazebo With 2 side Panels

Depth - 400cm

Issue 1 - 13/09/13

Important – Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call the

Customer Helpline: Argos = 0345 6400800

Address: 489-499 Avebury Boulevard Saxon Gate West, Central Milton Keynes Bucks,MK9, 2NW

For further assistance please visit http://www.argos-support.co.uk

Summary of content (9 pages)

PAGE 1
4x3M Waterproof Gazebo With 2 side Panels Assembly Instructions - Please keep for future reference 601/4650 Dimensions Width - 300cm Depth - 400cm Height - 265cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 6400800 For further assistance please visit http://www.argos-support.co.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS Read all instruction before using and keep for future reference Read these instructions carefully and familiarise yourself with the procedure before assembling the unit. Check that you have all the component parts following the list on the page 3 and familiarise yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into their groups. Ensure you have enough space to lay out all the parts before assembly.
PAGE 3
Components - Parts & Fittings If you have damaged or missing components, call the Customer Helpline: Argos = 0345 6400800 Please check you have all the parts listed below 1 2 3 1 x Gazebo Cover 1 x panel w/window 4 5 1 x panel 6 4 x Baseplate 2 x Middle Joint 1# 2# 4 x Top Pole (Φ18 x 1080mm) 3# 4 x Top Pole (Φ18 x 1095mm) 5# 4# 4 x Support Pole (Φ24 x 950mm) 7# 4 x Corner Joint 8 x Support Pole (Φ24 x 1020mm) 6# 4 x Leg Pole (Φ31 x 1045mm) 4 x Leg Pole (Φ31 x 1020mm) 8# 10# 1 x To
PAGE 4
Assembly Instructions Stage 1 – Fitting the Support Poles Step 1 Insert Support Pole 4# into the Support Poles 3# Meanwhile, insert Support Pole 7# into Support Pole 3# . Ensure all the poles are fully inserted and secure. See fig. 1&2 3# 4# IMPORTANT: Because of the size of this unit we recommend that it is built in the place intended for using 3# Fig.1 NOTE: Locate the unit on the flat Ground free from obstruction, in a sheltered area away from wind and heavy rain as they will damage the unit.
PAGE 5
Assembly Instructions Stage 2 – Fitting the Top Poles Step 3 Insert Top Poles 2# into the Top Poles 1# Meanwhile insert Top Poles 10# into the Top Poles 12#. Ensure all the poles are fully inserted and secure. See fig. 4&5 1# 2# Fig.4 10# 12# Fig.5 Step 4 Connect the Top Poles 1# & 2# to Corner joint 6 and Centre Connector 5 , then put Tube 8# into Centre Connector 5 ensuring all poles are fully pushed into joins. See fig 6.
PAGE 6
Assembly Instructions Stage 3 – Fitting the Gazebo Step 5 10# 11# Connect the top pole 10# & 11# . 5 Use hools provided at the end of pole 10# and 11# connecting pole 4# and middle joint 5 . 11# 11# 10# Insert Leg Pole 5# into the unit. Ensure all the poles are fully inserted and secure. See fig. 7. 11# 5# 10# 4# 5# 5# 5# Step 6 Carefully place the Gazebo Cover 1 over the assembled roof. Then pull the Gazebo tightly over the assembled roof frame. See fig.8. Fig.
PAGE 7
Assembly Instructions Stage 4 – Fitting the Legs Step 7 Insert the Baseplate 4 into the Leg Poles 6# Then insert the Leg Poles 6# into the unit. Ensure all the poles are fully inserted and secure. See fig. 9. 6# Fig.9 J6# 4 5# 4 6# 4 Step 8 6# 6# 4 Attach the Gazebo Cover’s Hooks into holes on the Leg Poles 6# . Tighten by moving the Hook to a lower hole. See fig.12. Fig.10 6# NOTE: It would be useful to ask someone to help you at this step. Hook 4 Fig.
PAGE 8
Assembly Instructions Stage 5 – Fitting the Guy Ropes Step 9 Attach the D Ring into the Baseplates 4 . See fig. 13. Fig.15 Attach the end of the Guy Rope B to the corner of the top cover ring on the Gazebo. Then attach one end to the peg and drive the Peg into the ground. See fig. 15. 16 and 17. Fig.14 Use the same method as in fig. 14 to fix the other Guy Ropes. The length of Guy Ropes can be adjusted. See fig.17. NOTE: The pegs are for location purpose only.
PAGE 9
Assembly Instructions Stage 6 – Fitting the Peg Step 11 Insert the pegs A to the two panels at the bottom. A A 3 2 See fig.21. Use the pegs A to fix the baseplates 4 . If the baseplate besides the panels, the pegs first need through fabric buckles at the bottom of panels, then insert to the baseplates 4 Fig.23 4 Fig.22 A See fig.22. 3 Assembled one is shown as right. See fig.23. Fig.21 2 3 A A Assemble is complete. 3 A A NOTE: It would be useful to ask someone to help you at this step.