Assembly Instructions

fig. 4
Assembly Instructions
Assembly Instructions
Stage 2 – Fitting the Back CushionsStage 1 –

NOTE: It would be useful to ask
someone to help you at this
stage.
NOTE: Carefully line up the
Ensure they align
correctly.
Metal Lock
two side metal locks.
Fit the velcro cover which is on
the back cushions onto the
velcro of the seat unit.
fig. 5
NOTE: You can ensure the Back
together by adjusting the
Cushions are closely joined
metal frame as show in fig. 5.
Step 1 ( Fig. 1)
- Carefully tilt back the seat
unit onto it's back.
See fig.2.
Fig. 1
Fig.2
Step 2 ( Fig. 2)
See fig.1.
This is not required for any other use.
between two seat.
EPE
-Remove the EPE from the gap
spanner
Preparing the Seat Unit
A
Fig.3
Step 3 ( Fig. 3)
NOTE: It would be useful to ask
someone to help you at this
stage.
2. Attach the Left B ,
Centre
C
and Right
Back Cushions
D
Then engage the metal locks and
push them together until you hear
them lock into position. 
See fig.4.
to the seat unit .
A
Firstly attach the arm cushion.
1. 
You can find the assembly steps
in the last page.
B
C
D
E
F
-Get the fitting bag from Bracket Rear.
to remove the Wooden Frame
(See Fig 2).
with a spanner.
F
F
E
-The armrest is put behind of seat cushion
Please get armrest
E
F
for assembly
See fig. 3.