Cabin bed - White Assembly Instructions - Please keep for future reference 1478538 Dimensions Length - 195cm Depth - 96cm Height - 71cm Weight - 20kg Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055 or e-mail: order@flexa.
Safety and Care Advice Important – Please read these instructions fully before starting assembly 80-10104-20 Cabin bed IMPORTANT! KEEP FOR FUTURE REFERENCE PLEASE DISPOSE OF PACKAGING MATERIAL. PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN WARNING! Not suitable for children under 4 years. WARNING! Do not place this child’s bed near heat sources, windows and other furniture. WARNING! Do not use this child’s bed if any of the parts are broken, torn or missing.
Safety and Care Advice Important – Please read these instructions fully before starting assembly • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups. • Assemble the item as close to its final position (in the same room) as possible. • Keep children and animals away from the work area, small parts could choke if swallowed.
Components - Parts If you have damaged or missing components, call the Customer Helpline: 0045 7668 8055 Please check you have all the parts listed below 1 Leg x4 (71.7x4.3x4.3cm) 2 No. 12-04307172-20 4 Slat x14 (89.7x6.5x1.47cm) 5 No. 12-01508971 7 3 T&G panel x2 (58.5x8.1x0.8cm) No. 12-00805853-20 8 Endrail curved x2 (87.7x9.2x2.0cm) No. 12-02008771-20 T&G panel x2 (58.5x8.7x0.8cm) No. 12-00805852-20 Bedside x2 (186.7x8.9x2.0cm) No. 1305-18673-20 3 6 Endrail x2 (87.7x6.5x2.0cm) No.
Components - Fittings Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required. No. 3922-06014 No. 3913-06090 A M6x90mm Connecting bolt x4 No. 3901-40030 B C M6 ø10x14mm Barrel nut x4 4,0x30mm Chipboard screw x28 No. 3930-10045 No.
Assembly Instructions Step 1 Attach the dowels D to bedsides 8 . D D It may be necessary to tap the dowels in very gently with a small hammer. 8 x2 E Step 2 Attach endrails 2 and 3 to leg 1 with screws E using the allen key. D Repeat same procedure for second headboard 1 2 E 307 UP E DOWN 410 3 Step 3 Slide T&G panel 7 between endrails 2 and 3 . 2 7 Followed by 8 T&G panel 6 and finish with 1 T&G panel 5 . 1 6 6 6 6 Attach leg 1 to endrails 2 and 3 with screws E using the allen key.
Assembly Instructions Step 4 Attach bedsides 8 to the legs 1 by pushing the barrel nuts B into the small holes in the bedsides 8 . Push connecting bolts A through the legs 1 to meet the barrel nuts B . A B 8 8 Then fasten with the allen key.
Assembly Instructions Step 6 Place one slat 4 in the centre of the bed. Follow the measurement . Place two slats 4 in the ends of the bed. Follow the measurement . PUSH C C 8 Push the bedsides together whilst attaching middle slat 4 to the bed with two chipboard screws C . 8 15 mm 843 mm C 4 4 4 8 Step 7 C C Position the remaining eleven slats 4 in the bed with a distance of 73 mm between each.
