Assembly Instructions

Stage 2 – Finishing the unitStage 1 – Fitting the Shade

1. Expand the Triangle Shade A

by pulling at each ends.

See fig. 1.

Caution

1. Indoor use only.

2. If in doubt about fitting this product. Please consult a suitably qualified electrician.

3. The temperature of the lamp rises very quickly. Do not touch the metal parts or glass of the lamp

after the light is turned on.

fig. 1

fig. 2

2. Use the same method as in stage

1 to finish the other 2 Shades. 

See fig. 4.

2. Insert the Triangle Wire Expander

D into the Triangle Shade A.

See fig. 2.

1. Pass main cable through the "C"

shape on top of Wire Expander.

Adjusting the length to center the

bulb inside Shade. 

See fig. 3.

fig. 4

fig. 3

NOTE: Carefully fit to the Wire

Expander to the Shade at both

ends taking care not to

damage it.

IMPORTANT:

The electric bulb should be

centered inside the Shade,

making sure it does not touch

the paper.

IMPORTANT:

Switch off the Lamp before

install the Shade.