SAN DIEGO - Small Sideboard Assembly Instructions - Please keep for future reference 412/7893 Dimensions Width - 104cm Depth - 47cm Height - 84cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800 Issue 1 - 15/04/15
Safety and Care Advice Important – Please read these instructions fully before starting assembly Check you have all the components and tools listed on pages 2 and 3. Remove all fittings from the plastic bags and separate them into their groups. Keep children and animals away from the work area, small parts could choke if swallowed. Make sure you have enough space to layout the parts before starting. Do not stand or put weight on the product, this could cause damage.
Components - Panels Please check you have all the panels listed below 14 Right front frame (81 x 6.5cm) 1 Top panel (104 x 47cm) 7 Middle wall panel (66.9 x 42.4cm) 15 Left front frame (81 x 6.5cm) 16 Front frame x 2 (89.6 x 6.5cm) underside 2 Base panel (95 x 42.4cm) 8 Door (59.6 x 39cm) 17 Vertical frame (64.4 x 6.5cm) 18 Middle front frame x 2 (43.6 x 6.5cm) 3 Back panel x 2 (96.8 x 34.8cm) 9 Shelf (44 x 42.4cm) 19 Side plinth x 2 (44.8 x 9.
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 03456 400 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Assembly Instructions Step 1 a: Fixing right front frame to the right side panel (Two people required for an easier assembly). a: Insert right side panel 4 into right front frame 14 through joints. b: c: 14 D 4 Yes! Note: Before fixing blocks 22 into place it is important to ensure that the slot and groove of parts 4 and 14 are fully pushed together and lined up correctly at the top and bottom. b: Place blocks D 22 No! 22 4 22 between the two marks as shown.
Assembly Instructions Step 3 Fitting Metal dowels. G Screw metal dowels G into right side panel 4 , left side panel 5 and top panel 1 . 5 G Note: Insert metal dowels as far as shown. 4 G G Do not over tighten. G G 1 Step 4 A Insert dowels A into the indicated parts.
Assembly Instructions Step 5 E Fixing drawer runners. E E Fit drawer runners to the right side panel 4 and middle wall panel 7 then fix it using screws E as shown. 21 21 E 21 21 21 4 Attention! The large holes of the middle wall panel to face down. E E 21 E 21 Attention! 21 7 Step 6 Insert shelf supports M into the right side panel 5 and middle wall panel 7 .
Assembly Instructions Step 7 Fixing middle wall panel. 7 With help, fit middle wall panel 7 to the base panel 2 then fix it using screws E . E 2 E 2 Step 8 Assembling parts. 16 Put parts 16 , 17 and 18 together as shown in the diagram. 17 18 16 18 Step 9 Insert the assembled frame into the holes on left side panel 5 .
Assembly Instructions Step 10 Fixing base panel. With help, fit base panel 2 to the left side panel. Insert 2 locking nuts H into base panel where shown. H Use a screwdriver to turn locking nuts H clockwise to lock. H Do not over tighten. 2 H H Step 11 Fixing right side panel. With help, place right side panel 4 properly ensuring dowels and front frames are all fit into their holes at the same time. Insert 2 locking nuts H into base panel where shown.
Assembly Instructions Step 12 Fixing top panel. Important: With help, carefully stand the product upright. H 1 H With help, fit top panel 1 to the cabinet. Insert 6 locking nuts H into side panels and middle wall panel where shown. H H H H N Use a screwdriver to turn locking nuts H clockwise to lock. Do not over tighten. N Fix metal bracket N in the middle wall panel and vertical frame using screws B as shown. B B Step 13 Important: With help, carefully lay down the product.
Assembly Instructions Step 14 Fix block 22 to the front plinth and front frame using screws D . 22 D D Step 15 C Fix cross rail 20 in the pre drilled holes on door 8 using screws C . C C C 20 8 Step 16 B Fitting hinges to door. Attach hinges J in the pre marked holes on door 8 using screws B as shown. J J J Attach handle I to the door using bolts F as shown.
Assembly Instructions Step 17 Fixing door. Important: With help, carefully stand the product upright. B With help centralise the door in the opening of the cabinet then fix the hinges using screws B as shown. Note: 8 Note: Hinges allow some adjustment after doors are fixed. Loosen screws and move doors to suit. Re-tighten screws. Step 18 Fitting door lock. a: Screw clip K in place using screws . Ensure that the 2 small wheels are flush with the edge of the base as shown in the diagram.
Assembly Instructions Step 19 Drawer assembly. a: 11 C a: Attach drawer sides 11 10 b: to the drawer front using screws C . 12 11 10 13 b: Slide drawer bottom 13 into slots on drawer sides and position drawer back 12 in place. C c: Holding the drawer c: back 12 , press the drawer sides and fix them using screws C . d: Using bolts attach drawer handle I to drawer front. 3x C d: C F F Repeat step 19 for the other drawers. I Step 20 Insert drawers into unit.
Assembly Instructions Step 21 Position shelf 9 into place. Make sure round edge is facing front. 9 9 Step 22 Fixing back panels. Important: Cabinet MUST be ‘square’ when back panels are attached. O Attach back panels 3 using nails O . 3 3 O O O Step 23 Fixing to wall. Furniture must be fixed to a wall. Fix wall strap Q to top of furniture using washer P and screw B . With help, move furniture into position. Note: Wall plugs not supplied.
A Guide to - Wall Mounting & Fixings Important: When drilling into walls always check that there are no hidden wires or pipes etc. Important note: If plastic wall plugs are supplied with your product: Make sure that the screws and wall plugs being used are suitable for supporting your unit. Consult a qualifed tradesperson if you are unsure. Hints: - these are only suitable for use in masonry walls. If you are in any doubt about the correct wall plugs for your wall, seek professional advice.