Operating Instructions

13
Fig 16c
Fix the side burner electrode (D3) on the side burner assembly (D1) using M4*8 bolt (E9). Put the side burner
(D4) through the hole of side burner assembly (D1) as Fig 16c.
Adjust the burner venturi against the valve. Make sure the valve tip goes into the venturi tube completely with
good alignment. Then tighten the side burner (D4) on the side burner assembly (D1) using M4*8 bolt (E9) as
Fig 16d.
Put the side burner grate (D5) on the side burner assembly (D1) and align with 3 holes as Fig 16e.
Connect the side burner electrode (D3) to the valve of the control panel assembly (B8) as Fig 16f and 16g.
Fig 16d
D3
D4
D5
Fig 16e
Fig 16f
Fig 16g
Electrode of Main Burner
Electrode of Side Burner
D4
D3
D5
PDF created with pdfFactory trial version www.pdffactory.com