Assembly Instructions

24
Troubleshooting
Problem Possible Cause Solution
Burner will not light
using the ignition sys-
tem
LP gas cylinder is empty Replace with full cylinder
Faulty regulator Have regulator checked or replace
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Electrode wire is loose or disconnected
on electrode or ignition unit.
Reconnect wire
Electrode or wire is damaged Change electrode and wire
Faulty push button ignitor
Change ignitor
Burner will not light
with a match
LP gas cylinder is empty Replace with full cylinder
Faulty regulator Have regulator checked or replace
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Low flame or flashback
(fire in burner tube— a
hissing or roaring noise
may be heard)
LP gas cylinder too small Use larger cylinder.
Obstructions in burner Clean burner
Obstructions in gas jets or gas hose Clean jets and gas hose
Windy conditions. Use BBQ in a more sheltered position
Gas valve knob difficult
to turn
Gas valve jammed Replace gas valve