Assembly Instructions

Insert slats into holes
Assembly Instructions
Step 10
Step 9
7
Fitting the guy ropes
D
b:
b:
c:
use the peg to fix
the base plate and
b:
attach the end of the
guy rope to the corner
B
of the top cover ring on
the gazebo.Then attach
the other end to peg
A
and drive the peg into
the ground.
D
a: Attach the rope end
onto the guy rope
Note:
the pegs are for
location purposes
only, they will not
support the unit in
high winds, see
above instructions.
D
2
Repeat above steps to
assemble the other guy
ropes.
2
the side panels.
A
BB
B
C
c:
c:
a:
C
B
C
B
B
C
C B
so that the length of guy
ropes can be adjusted.