Cream Gazebo With Side Panels Assembly Instructions - Please keep for future reference 292/6625 Dimensions Width - 270cm Depth - 270cm Height - 250cm Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: Argos = 0345 640 0800 Issue 2 - 20 /06/14
IMPORTANT SAFETY INSTRUCTIONS Read all instruction before using and keep for future reference Read these instructions carefully and familiarise yourself with the procedure before assembling the unit. Check that you have all the component parts following the list on the page 3 and familiarise yourself with each part before proceeding. Take all the fittings out of the plastic bag and separate them into their groups. Ensure you have enough space to lay out all the parts before assembly.
Components - Parts If you have damaged or missing components, call the Customer Helpline: Argos = 0345 640 0800 Please check you have all the parts listed below 1 2 1xGazebo Cover 1xPanel w/window 4 3 5 4xTop Pole (φ18x688mm) 10 8xTop Pole (φ18x565mm) 4xCenter Joint 1xCenter Connector 6 4xBase Plate 1xPanel w/o window 7 8 8xSupport Pole (φ18x810mm) 4xSupport Pole (φ18x785mm) 11 4xLeg Pole (φ18x688mm) 12 4xLeg Pole (φ18x688mm) 4xLeg Pole (φ18x688mm) Components - Fittings Please check y
Assembly Instructions Step 1 Assembling support poles Insert support pole 8 into the support pole 7 ensure all the poles are fully inserted and secure. 7 7 8 Important note: Because of the size of this unit we recommend that it Ensure to locate the unite on the flat ground free from obstruction, in a sheltered area away from wind and heavy rain as this will damage the unit.
Assembly Instructions Step 3 Assembling top poles Insert top poles 6 into the top poles 5 .Ensure all the poles are fully inserted and. secure. 6 5 5 4 Step 4 Assembling corner j oints and centre connector Connect the top pole to corner joints 4 and centre connector 3 3 4 5 5 6 5 4 6 Note: It would be useful to ask someone to help you at this step.
Assembly Instructions Step 5 10 Assembling leg poles insert leg poles 10 into the unite. Ensure all the poles are fully inserted and secure. 10 10 Note: It would be useful to ask someone to help you at this step. 4 10 1 Step 6 Assembling ga zebo covers Carefully place the gazebo cover 1 over the assembled roof. Then pull the gazebo tightly over the assembled roof frame. Note: It would be useful to ask someone to help you at this step.
Assembly Instructions Step 7 Fixing leg poles a: insert the base plate 2 into the leg pole 12 b: insert leg poles into leg poles 11 Then insert the whole connected leg poles into the unit.Ensure all the poles are fully inserted and secure. 12 Note: It would be useful to ask someone to help you at this step.
Assembly Instructions Step 9 Fitting the guy ropes a: Attach E on the guy rope C so that the length of guy ropes can be adjusted. E E b: attach the end of the E guy rope C to the corner of the top cover ring on the gazebo.Then attach the other end to peg A and drive the peg into the ground. C C C a: Repeat above steps to assemble the other guy ropes. c: use the peg B to fix the base plates 2 .
Assembly Instructions Step 10 Fitting the panels a: Hang on the two panels at the top using the curtain ring D D a: b: Use the velcro tapes at side of panels to fasten to the gazebo legs. Side panels can be taken off separately. Warning: Do not assemble or disassemble during strong winds. Assembly is complete. b: Important note: always use this product with caution and read the important safety instructions.
