Assembly Instructions

ManualsBrandsArgos Home ManualsBedroom furniture setsSeville 3 Piece 3 Door Wardrobe Package - White

Assembly Instructions - Please keep for future reference

Issue 2 - 12/12/13

Ruler - Use this ruler to help correctly identify the screws

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: Help@ClickSpares.co.uk (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Dimensions

Seville - Bedside

ALR2908

171/8140

145/0446

157/3622

170/9214

Width - 35.5cm

Depth - 33cm

Height - 41.5cm

160/9785

162/9325

162/7956

159/7732

Issue 2 - 12/12/13 - New cat codes added

Summary of content (12 pages)

PAGE 1
Seville - Bedside Assembly Instructions - Please keep for future reference 171/8140 170/9214 145/0446 157/3622 159/7732 160/9785 162/9325 162/7956 Dimensions Width - 35.5cm Depth - 33cm Height - 41.5cm MADE IN BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs approximately 7kgs. Please lift with care. • Make sure you have enough space to layout the parts before starting. • Check you have all the components and tools listed on pages 2 and 3. • Do not stand or put weight on the product, this could cause damage. • Remove all fittings from the plastic bags and separate them into their groups.
PAGE 3
Components - Panels If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 4
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
PAGE 5
Assembly Instructions If you have damaged or missing components, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.uk (quoting your original order number and the reference numbers below) Step 1 Plain chipboard surface Prepare the drawer front B Screw 2 metal dowels into the holes shown on the back of the drawer front 4 . B B B 4 Note: Tighten metal dowels up fully against the panels.
PAGE 6
Assembly Instructions Step 4 299mm Fit the drawer base Slide the drawer base 8 down the grooves in the drawer sides 5 and 6 and down into the groove in the drawer front 4 . 8 6 5 4 Step 5 Fit the drawer back H Fit the drawer back 7 between the drawer sides 5 and 6 . H 7 Make sure that the drawer base 8 fits into the groove in the drawer back 7 . 6 H 8 6 5 H Hold the drawer back 7 in position and tap the knock-in pegs H through the holes in the drawer sides 5 and 6 .
PAGE 7
Assembly Instructions Step 7 Attach the handle E Attach the handle G to the drawer front 4 using screw E . G 4 Step 8 Prepare the left side Separate the runners I . Push fit the left runner I marked ‘L’ into the left side 1 . L I Finished front edge F600 I 1 Note: Runners must be be fitted flat against the panel. If necessary gently tap into final position. Step 9 Prepare the right side Push fit the left runner I marked ‘R’ into the right side 2 .
PAGE 8
Assembly Instructions Step 10 Plain chipboard surface A Prepare the top and the base x2 Tap 2 wooden dowels A into the top 3 and the base 3 . 3 A Finished front edge Step 11 D Join the top to the right side Push the top 3 onto the right side 2 and secure with 2 screws D . D 2 3 Finished front edge Step 12 Finished front edge D Join the base to the right side Push the base 3 onto the right side 2 and secure with 2 screws D .
PAGE 9
Assembly Instructions Step 13 Fit the left side Push the left side 1 onto the assembly and secure with 4 screws D . D D 1 D D Step 14 a: Fit the back b: a: Square up the unit by making sure that measurement x to x equals y to y. b: Place the back The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y x F 9 onto the unit. Nail F around the 3 edges of the back 9 as shown. Stand the unit up for the next step.
PAGE 10
Assembly Instructions Step 15 Insert the drawer Lift the front of the drawer whilst inserting to overcome the ‘stop’ system. Note: To ensure that your drawer runs smoothly, spray a small amount of furniture polish into the grooves. Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928 or email: Help@ClickSpares.co.
PAGE 11
PAGE 12
ALR2908