Specifications

H Position: Adjust horizontal position of OSD Menu by value.
V Position: Adjust vertical position of OSD Menu by value.
Reset - Initial set-up, preset by the factory before forwarding.
Reset Color - Initial color.
Reset Position (A RGB Only) - Initial position.
Exit - Go back to main menu.
Troubleshooting
Problem & Question
Possible Solution
Power LED is not on
*Confirm power supply output.
*Check power connection.
No Plug & Play
*Check if the PC System is Plug & Play
compatible
*Check if the Video Card is Plug & Play
compatible
Picture is Fuzzy
*Press Reset in OSD.
Picture bounces or wave
pattern is present in the
picture
*Move electrical devices that may cause
electrical interference.
The Power LED is
ON(Amber) but there’s no
video or no picture
*Verify input signal.
*Make sure cables are properly
connected.
* Inspect input cables for damage.
*Confirm the input source is operational
by connecting a separate monitor to the
source.
Discolored Image (RED,
GREEN, or BLUE)
* Inspect the monitor’s video or DVI
cable and make sure that none of the pins