A615 Smart Multi Function Display Reference Guide Tel 951 813 3600 or 800 967 4287 · Fax 888 550 6578 · www.
TABLE OF CONTENTS Mounting, Wiring, Care Pages 1-2 Quick Start Page 3 Android Interface, Mouse Control Pages 4-6 Bezel Button Control Operation Pages 7-12 Troubleshooting Page 13 Warranty, Repair, Service Policy Pages 14-17 Specifications Pages 18
Your Argonaut A615 Smart Multi Function Display (SMFD) has been engineered for trouble-free use in the marine environment. Please retain this reference guide for relevant installation, wiring, care and operational information. Surface Mounting The A615 SMFD has been designed for an easy, secure and sealed installation. installations, please note the following steps: For surface mount 1) Locate a suitable installation mounting surface.
attach to 8 corresponding mount plate holes. Tighten screws such that tips are about flush with the mount back edge surface (note: further adjustment tightening will be done in steps listed below). 5) Allow display assembly to drop back into cutout hole such that the screw heads are flush to the front mounting surface. Carefully tighten front surface screws an equal amount to pull display up to a perfectly aligned “flush position with outside front surface.
submersion or high pressure water. Do not pull or strain cabling as this can break the cable clamp seal. Quick-Start Instructions 1.) Connect power as described in “Wiring” section below. Upon power connection, you will see the Argonaut logo boot screen for several seconds during boot up followed by the home screen. 2.) Connect the included optical mouse to navigate the screen and make any initial changes to settings or Apps. 3.
A615 Android Interface & Mouse Control The Argonaut A615 utilizes the Android Jelly Bean 4.2.2 operating system interface. It is recommended to connect the supplied optical mouse for initial system set up and configuration. The mouse will operate on screen in a very similar manner to a windows computer mouse. You will clearly see the mouse pointer on the screen and it will remain in its last position. Note the following basic mouse functions within Android: Standard 2 Button Mouse: 1.
Home Screen Upon powering up, the home screen will be displayed. You can add or remove app launch icons within the home screen as desired. To remove an app, single left click and hold on the app then drag to the red X (delete) at top center screen. Note that this action only removes the app from your home screen but the app can still be found (and reloaded to home) on the system within the “Application Menu” described below.
Settings The “Settings” menu allows adjustments and control for all Android functions. Within each Settings menu item are a variety of sub menus allowing a high degree of user customization and control. 1.) WIRELESS & NETWORKS: Turn system Wi-Fi on or off by left clicking on the ON/OFF box. Available networks and their respective signal strengths will be displayed to the right. Select any available network in order to switch to or activate it.
Bezel Button Control Summary Note that the 5 buttons located on the front bezel are designed to control LCD functions and do not interface with the Android operating system. 2. Down (Auto) 1. Menu 3. Decrease 1 2 3 4 5 Menu Down (Auto) Decrease Increase Source/Exit 6 Power LED 7 Power 4. Increase 6. Power LED 5. Source Hotkey/Exit 7. Power Menu Key Down Key (HOT Key: Auto Config.
The OSD (On Screen Display) menu controls the display image and settings. Input Source Analog Input - Change input signal source to Analog RGB. NOTE: THIS IS THE DEFAULT ANDROID SIGNAL SELECTION Digital Input - Change input signal source to DVI (Digital Video Input). SVideo Input - Change input signal source to S-video. Composite Input - Change input signal source to composite video or RCA. Exit - Go Exit back to main menu.
Picture Brightness – Note: This menu item is disabled. Brightness is controlled by front bezel buttons as described on page 4. Contrast - Ratio of luminance between black and white. Adjust distinction. Blacklevel - Adjust black level. Sharpness - Adjust Sharpness of pictures. Hue (video only) - Adjust between green tone and purple tone. Saturation (video only) - Adjust color intensity. Exit - Go back to main menu.
Color Temperature Choice of: User, Warm, Normal, and Cool – RGB can be adjusted. User: Able to adjust the color by controlling Red, Green, and Blue. Warm: Red-tinged screen. Normal: Green-tinged screen. Cool: Blue-tinged screen. Auto Color (A-RGB Only) - Color automatically set for input signal. Exit - Go back to main menu.
Image Control Available Mode – Analog RGB Auto - Auto configuration of geometry. Width - Adjust horizontal size of the screen by increasing or decreasing the number of picture elements. Phase - Adjust Phase of screen. Used when noise or overlapped lines are shown on the screen. H Position - Move screen horizontally. V Position – Move screen vertically. Exit - Go back to main menu.
Tool OSD Control Time Out: The range of controlling the duration time of the OSD menu (OSD turn-off time). H Position: Adjust horizontal position of OSD Menu by value. V Position: Adjust vertical position of OSD Menu by value. Reset - Initial set-up, preset by the factory before forwarding. Reset Color - Initial color. Reset Position (A RGB Only) - Initial position. Exit - Go back to main menu.
Troubleshooting Problem & Question Power LED is not on Picture is Fuzzy Picture bounces or wave pattern is present in the picture The Power LED is ON(Green) but there’s no video or no picture The Power LED is ON(Amber) but there’s no video or no picture The Power LED is ON(Amber flashing) but there’s no video or no picture Discolored Image (RED, GREEN, or BLUE) Screen image is not centered or sized properly.
ARGONAUT A615 SMFD TWO YEAR PARTS AND LABOR WARRANTY This warranty covers the Argonaut Computer A615 Smart Multi Function Display (SMFD). The warranty period is two years from the date of the original purchase invoice. If you think your Argonaut product needs repair, please check with the Reseller you purchased your Argonaut from to determine if it needs repair as well as where to get it repaired as described below.
Damage caused by improper electrical connection (reverse polarity) or excess power surges. Damage caused by improper installation. Damage caused by excessive cable strain or pulling including water damage caused as a result of broken cable seals. Damage caused by any other abuse, misuse, mishandling or misapplication. Damage caused by extended operation in direct sunlight at temperatures above 95°F. Damage caused by operation at freezing temperatures below 32° F. ARGONAUT COMPUTER, INC.
overnight charge at the expense of the customer, and could delay repair services up to 1 week for rerouting. Minimum lead-time for all in-warranty repairs is 2 weeks. NOTE: Parts removed from repaired products are owned by Argonaut Computer, Inc. Warranty is not extended on repaired product.
restocking fee but customer may be charged for missing components or damage. Processing returns can be complicated. Please allow 10-14 days after receipt of product to process your credit. To request a Return Merchandise Authorization (RMA) number, call (951) 813-3600 during normal business hours. Be sure to have your original invoice in hand before calling. Detailed return shipping instructions will be provided to you by fax or email.
Detailed Specifications System Features Android Processor: Android Apps: Interface/Network: Display: User Control: Power: Dimensions: Weight: Mounting Options: Quad Core ARM Cortex A9 With Integrated Mali Graphics, Memory: (1G RAM, 8G NAND Flash, 8G Built-In SD Card), Android Jelly Bean 4.2 OS. Preinstalled Full Featured Navigation App Including All US Coastal Chart Data. Preinstalled Full Featured Live Weather Monitoring With Location Based Radar. Optional AIS App With Class B Transponder (WIFI).
