Operation Manual

www.argonaudio.com
Stream 2
57
10. Software upgrades and factory reset
10.1 Software upgrade
From time to time, Argon Audio may make software upgrades available with bug fixes and/or
additional features. You can either check manually, or set Stream2 to check periodically
automatically (this is the default). If Stream2 detects that newer software is available, it asks if you
want to go ahead with an update. If you agree, the new software is then downloaded and
installed. After a software upgrade, all user settings are maintained.
CAUTION:
Before starting a software upgrade, ensure that Stream2 is
plugged into a stable mains power connection. Disconnecting
power during a software update may permanently damage the
unit.
To turn automatic checking on or off, select Menu > System settings > Software update >
Auto-check setting.
10.2 Factory reset
A factory reset resets all user settings to default values, so time/date, network configuration and
presets are lost. However, the Adapter’s current software version is maintained, as is registration
with the Internet radio portal. Internet radio favourites therefore remain unless you re-register your
Adapter with another account on the portal website.
To perform a factory reset, select Menu > System settings > Factory reset Proceed > Yes.