Operation Manual

www.argonaudio.com
Stream 2
19
3.1.1 12/24 hour display
To change between 12 and 24 hour display, select Set 12/24 hour and then select your preference.
3.1.2 Time/date
The time and date can be updated manually or automatically. With auto-update, the time and date are
automatically synchronised with external clocks. Auto-update is generally more accurate.
Auto-update
Uses a time signal sent from the Frontier Silicon Internet radio portal when in any network-
connected mode.
1. Select Update from Network or No update.
2. Set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network
may be wrong by one hour. When daylight savings are in effect (during the winter),
turn on the Daylight savings option to rectify this.
Stream2 will auto-update from the selected source when time information is available.