Operation Manual

www.argonaudio.com 11
O c t a v e 3 A
Play back via Bluetooth
• Any music player app can be used for play back.
However there are a lot of music player app’s out
there and some are not really and some are beta
apps. These can have issues when used with
Bluetooth. So we recommend to use music player
apps that come preinstalled with your
mobile/tablet/pc etc
• It is recommended that you set the volume level
on Argon Octave 3A at a rather high level and
use your mobile/tablet/pc etc to adjust the play
back volume.
Notice; if you have connected Argon Octave 3A via
Bluetooth to a Windows based PC/Laptop.
Argon Octave 3A will automatically connect to your
PC/Laptop when it’s turned on. To avoid this you need to
disconnect Argon Octave 3A in the PC/Lap top Bluetooth
settings
Operating Argon Octave 3A
Power on-off/Volume control
NOTICE this knob/button has TWO FUNCTIONS:
1) Turn power o/offn, by turning the knob, first step
and it gives a click.
2) Controlling volume by turning the knob towards +
or -
Controlling the volume
The main volume on Argon Octave 3A is adjusted on the
back side of Argon Audio Octave 3A.
It is recommended that you set the volume level on Argon
Octave 3A at a rather high level and use your
mobile/tablet/pc etc app to adjust the play back volume.
Regarding TV sound, most TV remotes can control the
Argon Octave 3A active speaker volume if connected to
variable TV audio out and to the 3,5 mm mini jack input on
Argon Octave 3A.
Argon Octave 3A will always start up on the last used play
back source, unless it’s not connected or turned on
anymore.
Manually turn Argon Octave 3A ON or OFF
Turn the volume know all the way down to turn Off and you
will hear a click.
From Off position turn the volume knob up until you hear a
click, and the Speaker is now in On mode-