Operation Manual

www.argonaudio.com 10
O c t a v e 3 A
Use of Bluetooth audio connection
Pairing and connecting Bluetooth
• Turn on the Argon Octave 3A
• A Blue light will show in the front display-eye
• Activate Bluetooth on your mobile/tablet/pc etc
• Activate “make device discoverable” on your mobile/tablet/pc etc
• Make your mobile/tablet/pc etc search for Bluetooth devices
• “Argon Octave 3A” will show up in the display as “found”
• Tab on the “Argon Octave 3A” text on the mobile/tablet/pc etc to pair
• When paired tap again on the “Argon Audio Octave 3A” text to Connect
• Your mobile/tablet/pc etc will now show Argon Audio Octave 3A “connected to media playback”
• Start playback on the mobile/tablet/pc etc.
A few things to be aware about
• Before search, pair and connecting a new device, disconnect any other already connected devices. Disconnect it on
your mobile/tablet/pc etc. or disconnect by pressing the “BT MATCH” button on the back of Argon Audio Octave 3A
• It’s also recommended to press the “BT MATCH” button if you change to play from a USB or analogue connected
source.
• If you connect your Argon Audio Octave 3A to a PC/Laptop via Bluetooth, there might be a few things you need to be
aware about, all depending on what operating system you have on your PC/Laptop
• After having connected the (following the connection process already described), you might need to activate the Argon
Octave 3A as default playback device on your PC/Laptop. You do this by:
• Opening the “Sound” settings menu from either “Control panel” or from the desk top taskbar in
Windows (clicking the symbol indicating a speaker).
• In the window that pop-up chose “playback” tab.
• If Argon Octave 3A is already connected, two or more playback devices will be shown. Argon Octave 3A will be
named as “Bluetooth hands free audio”.
• Click on the device indicator and choose “set as default”, and you are ready to go.