Operation Manual

www.argonaudio.com
iNet6+
8
2.3 Connectors and switches
As shown below iNet6+ has connectors (from left to right) for the following:
• Ethernet RJ45 (for wired internet connection)
• Wi-Fi antenna connector
• DAB/FM antenna connector
• Optical Digital output (to connect to digital source)
• Line out (to connect to an external amplifier)
• Power on/off button
• Fuse holder
• Main power in
Notice:
If iNet6+ is connected to a Argon DA2 amplifier its has to be connected only by Optical digital out/in.
If iNet6+ is connected to DA2 via analogue RCA the volume function on the remote will not work properly.