Operation Manual

www.argonaudio.com
iNet6+
7
2.2 Remote control
The remote control operates in a
similar way to the main keypad.
Select
Press to select your choice.
Arrows
Left, right up and down (with “select” in the middle, is used to navigate)
Volume
Turn to adjust the volume up or down
Power
Power: Turns iNet6+ on or back to
Off: Puts iNet6+ into stand-by mode (showing clock and date). Cancels sleep function.
Sleep
Sleep/snooze: When playing, standby after a set time.
When alarm is sounding, snooze for a set time, by pressing the Snooze button on the
remote of the iNet6+
Mode
Mode: Cycle through the modes: Internet Radio, Music player, DAB, FM, Aux in
Alarm
Enters alarm wizard, turns off alarm (when alarm is sounding) and toggles between
alarms in standby.
Info
Info: View more information about the station or track playing. Press again to cycle
through further information screens then return to the normal Now playing screen.
Back
Back: Return to previous screen. In play mode, this button may be used to return to the
last track list or station list.
Menu
Menu: Show menu for the current mode. Press again to show Now playing screen.
Pre
Preset: Press for the Preset recall/Save menu;
1-6
Preset: stored stations
Shift
Can make you choose more than the 4 preset stations on the remote.
Next: Select next track in Music Player mode
Previous: Select start of track, previous track in MusicPlayer mode
[1] Some buttons have alternate functions depending on whether they are pressed quickly or held down.
Notice:
If iNet6+ is connected to a Argon DA2 amplifier its has to be connected only by Optical digital
out/in. If iNet6+ is connected to DA2 via analogue RCA the volume function on the remote will
not work properly.