Operation Manual

www.argonaudio.com
iNet3+
21
3.1.3 Network
iNet3+ is compatible with all common network protocols and encryption methods, including Wi-Fi Protected
Setup (WPS).
To connect iNet3+ to your network, you need one of the following:
• A wired router and an Ethernet (RJ45 network) cable
• A Wi-Fi wireless router, together with password key if set
Select WLAN region/country > Wi-Fi network
(SSID), and then select a network from the list.
To connect to a wired network, select [Wired], after
ensuring that the Ethernet cable from the wired router
is connected to the Ethernet socket of the iNet3+.
If the network is open (non-encrypted), iNet3+ connects
without any further ado; see Completion below.